Adsorption of thorium from aqueous solutions by perlite

The use of expanded perlite for the adsorption of thorium from aqueous solution by batch technique is presented. The effects of particle size, pH of the solution, initial thorium concentration, shaking time, V/m ratio and temperature were determined. It was found that the adsorption capacity increases by the increase in the pH of the suspensions. The rate of thorium adsorption on expanded perlite was observed to be fast in the first hour of the reaction time. Adsorption isotherms were expressed by Langmuir and Freundlich adsorption models and the adsorption experiments conducted at 30 ± 1 °C showed that the adsorption isotherms correlated well with the Langmuir model. From the adsorption data, thermodynamic parameters such as ΔG^o, ΔH^o and ΔS^o were calculated as a function of temperature.     

改性粉煤灰及其处理废水的机理

应用正交设计的基本理论,研究了PDMDAAC(聚二甲基二烯丙基氯化铵)改性粉煤灰的最佳条件,并将改性粉煤灰用于模拟印染废水的处理,探索了改性粉煤灰处理废水的机理。结果表明,在原PDMDAAC的pH下．控制PDMDAAC的浓度为40g／L,恒温30℃．反应1h为最佳改性工艺,改性粉煤灰处理废水的机理以吸附电中和为主。     

吸附法处理预焙阳极沥青烟研究现状与进展

预焙阳极生产过程中产生的沥青烟气严重污染环境并危害人类健康。目前,沥青烟的治理方法主要有四种,即吸收法、燃烧法、静电捕集法及吸附法。前三种方法处理费用高、应用范围窄,并有二次污染等问题。吸附法工艺简单、净化效率高、无二次污染,是一种很有发展前途的方法。在综合评述吸附法治理沥青烟研究及应用现状的基础上,提出了吸附法治理沥青烟今后的研究工作重点：（1）易吸附／脱附沥青烟的高效滤料开发;（2）吸附及再生装置与工艺的开发改进。     

均质化莲子草根系分泌物对黏土吸附四环素的影响

在不同比例空心莲子草粗根(TR)和细根(FR)分泌物均质化条件下,研究膨润土和高岭土对四环素(TC)的等温吸附特征,并分析pH值、温度和离子浓度对TC吸附的影响.结果表明,分泌物均质化后黏土对TC的吸附符合Henry模型,FR均质化对TC吸附的促进作用比TR均质化更强,高岭土对TC吸附的增长幅度比膨润土更大;在pH值2...     

两性磁化炭添加比例对河流沿岸土吸附Cu2+的影响

将两性(十二烷基二甲基甜菜碱)修饰磁化炭分别以质量分数0、1%和2%加入嘉陵江流域(川渝段)内苍溪(CX)、南部(NB)、嘉陵(JL)和合川(HC)沿岸土中,考察各混合土样对Cu^2+的等温吸附和热力学特征。结果表明:混合土样对Cu^2+的最大吸附量为58.36 mmol/kg~366.85 mmol/kg,添加等量两性磁化炭时各混合土样对Cu^2+吸附量表现为JL>NB>CX>HC的趋势,且添加比越高吸附能力越强。各混合土样对Cu^2+的吸附为自发、吸热和熵增的反应过程,对Cu^2+的吸附量与温度和pH值均呈正相关关系。当离子强度为0.1 mol/L时,各混合土样(除HC外)对Cu^2+的吸附量最大。     

Validation of discharge and atmospheric dispersion for unpressurised and pressurised carbon dioxide releases

This paper discusses the validation of discharge and subsequent atmospheric dispersion for both unpressurised and pressurised carbon dioxide releases using the consequence modelling package Phast.The paper first summarises the validation of the Phast dispersion model (UDM) for unpressurised releases. This includes heavy gas dispersion from either a ground-level line source (McQuaid wind-tunnel experiments) or an area source (Kit-Fox field experiments). For the McQuaid experiments minor modifications of the UDM were made to support line sources. For the Kit Fox experiments steady-state and 20-s finite-duration releases were simulated for both neutral and stable conditions. Most accurate predictions of the concentrations for finite duration releases were obtained using the UDM Finite Duration Correction method.Using experiments funded by BP and Shell and made available via DNV's CO2PIPETRANS JIP, the paper secondly summarises the validation of the Phast discharge and dispersion models for pressurised CO₂ releases. This modelling accounted for the possible presence of the solid CO₂ phase following expansion to atmospheric pressure. These experiments included both high-pressure steady-state and time-varying cold releases (liquid storage) and high-pressure time-varying supercritical hot releases. Both the flow rate and the concentrations were found to be predicted accurately.The above validation was carried out with no fitting whatsoever of the Phast extended discharge and dispersion models.     

Phast validation of discharge and atmospheric dispersion for pressurised carbon dioxide releases

The consequence modelling package Phast examines the progress of a potential incident from the initial release to the far-field dispersion including the modelling of rainout and subsequent vaporisation. The original Phast discharge and dispersion models allow the released substance to occur only in the vapour and liquid phases. The latest versions of Phast include extended models which also allow for the occurrence of fluid to solid transition for carbon dioxide (CO₂) releases.As part of two projects funded by BP and Shell (made publicly available via CO2PIPETRANS JIP), experimental work on CO₂ releases was carried out at the Spadeadam site (UK) by GL Noble Denton. These experiments included both high-pressure steady-state and time-varying cold releases (liquid storage) and high-pressure time-varying supercritical hot releases (vapour storage). The CO₂ was stored in a vessel with attached pipework. At the end of the pipework a nozzle was attached, where the nozzle diameter was varied.This paper discusses the validation of Phast against the above experiments. The flow rate was predicted accurately by the Phast discharge models (within 10%; considered within the accuracy at which the BP experimental data were measured), and the concentrations were found to be predicted accurately (well within a factor of two) by the Phast dispersion model (UDM). This validation was carried out with no fitting whatsoever of the Phast extended discharge and dispersion models.     

Ecological state equation

The direct equivalence between ecology and thermodynamics has not been attained despite accepted thermodynamic features of the ecosystem. This article explores the homeomorphism between ecology and statistical mechanics by analysis of ruderal vegetation. In conventional thermostatistical algorithm, the pro-kinetic effect of temperature on molecules was replaced by the anti-kinetic effect of species diversity on biological individuals. The existence of an ecological equivalent of the thermodynamic Boltzmann constant was empirically verified. From the relationship of this constant with biocenological variables, we derived a probable ecological equation of state under stationary and quasi-stationary conditions. This equation of state is homeomorphic with regard to the ideal gas state equation, and it is useful to infer the value of some biocenological parameters whose direct measurement is difficult, as biomass, energy and dispersal. According to these results, ecosystem assessment from conventional thermostatistics is plausible and empirically verifiable. This approach offers useful analytical tools for the conservation and restoration of ecosystems.     

239Pu在西南某地板岩与土壤中的吸附行为

以西南某极低放废物处置库预选场址地质环境中板岩与土壤为吸附介质,通过吸附实验和解吸实验,研究了不同介质粒径、环境温度(10℃—50℃)、水相pH(4—12)对239Pu核素在板岩与土壤介质中吸附行为的影响特征.吸附实验表明,水相环境中板岩和土壤介质对239Pu核素的吸附过程在10 d左右达到平衡,并且其吸附分配比随着介质粒径的减小而增大,随着水相pH值的增大而增大,但温度对其吸附的影响不明显.解吸实验表明板岩和土壤介质对239Pu核素的吸附是可逆的.     

Characterization of aluminium-based water treatment residual for potential phosphorus removal in engineered wetlands

Aluminium-based water treatment residual (Al-WTR) is the most widely generated residual from water treatment facilities worldwide. It is regarded as a by-product of no reuse potential and landfilled. This study assessed Al-WTR as potential phosphate-removing substrate in engineered wetlands. Results indicate specific surface area ranged from 28.0 m² g⁻¹ to 41.4 m² g⁻¹. X-ray Diffraction, Fourier transform infrared and energy-dispersive X-ray spectroscopes all indicate Al-WTR is mainly composed of amorphous aluminium which influences its phosphorus (P) adsorption capacity. The pH and electrical conductivity ranged from 5.9 to 6.0 and 0.104 dS m⁻¹ to 0.140 dS m⁻¹ respectively, showing that it should support plant growth. Batch tests showed adsorption maxima of 31.9 mg P g⁻¹ and significant P removal was achieved in column tests. Overall, results showed that Al-WTR can be used for P removal in engineered wetlands and it carries the benefits of reuse of a by-product that promotes sustainability.